Ignition barrel?
Answers:
simular to ordenary fiesta
take off plastic cowlings top and botem
remove old snap bols with hamer and chissle
remove loom
replace with now Kit making sure you snap the new bolts (so no one can nick the car)
replace loom
and cowling
dead easy trust me done loads.
Do you mean JUST the barrel or the whole lot that's connected to the steering column?
Have a look at this it may help
http://www.fordscorpio.co.uk/ignitionloc.
just one screw and a cable plug slides right out
If you have a key, turn it to the first (accessory) position, this will allow a spring pin to be pushed in on the outside of the barrell, (remove cowlings to see) and the barrell pulls out with key. If you have no key, use a slide hammer with scew end or ask a 'hoodie'.
The answers post by the user, for information only, UKQnA.com does not guarantee the right.