Peugot 106 gearbox oil change how to?
Answers:
pull the drain plug and refill through the level hole, it's messy, you may want to have a lube station do it :)
just buy another there rubbish cars anyway
Go to the garage.
Say "Can you change my gearbox oil, please?"
Pay them money.
If you have to ask morons like us lot here, it's too difficult for you!
Go to Halfords and buy a new oil filter, and the required oil and a sump plug.
Go home and have a cup of tea. Go under your car with a socket, you will know the size cos it fits the plug you have just bought. Put a bucket under the sump and undo the plug, watch your face, and let it drain out. Replace the new plug and fit the new oil filter, it just screws out.
Fill with new oil, refer to manual for correct type.
Some stupid answers here.
I have never done a 106, but there should be a drain plug at the lowest point on the gearbox and a level plug which will put the level at about the level of the driveshafts.
Drain the oil when hot and refilling will probably be nearly impossible unless you have a funnel and some plastic tubing to fiddle around the angles to get to filler or level plugs,
I use a 2 litre Coke bottle with the bottom cut out and a plastic tube connector which started as a plug lead end and attatch the bottle to the bonnet and hang it up like a medical drip.
If you get a garage to do it check they get the level right too much it leaks out and damages the seals, too little the seals wear and allow the renains of the oil to leak out
why do you need to change the oil ? but if you do look under the near side drive shaft you should see the drain plug and above it there is the filler plug
The answers post by the user, for information only, UKQnA.com does not guarantee the right.