VW wrenches? headbolt torque specs for a 5.1994 1043cc 33kw Polo.I`m an ole wrencher & books are like me.
Answers:
you can reuse the cylinder head bolts on this model
torque bolts to 40 nm (newton metres) wait a couple mins
then torque again to 60 nm
then finaly tighten bolts 180 degrees
which is half a turn.easy way is to pick a reference point at say 12 oclock and turn till 6 oclock (might be easier to use 3 and 9 oclock reference points.. start with centre bolts and work out in clockwise direction
hope you understand what i mean
data from auto data cd which i use at work..
good luck
autozone.com has repair manuals online for free for most cars. They do not have them for every car though. Here is the site
http://www.autozone.com/servlet/uibroker.
stage 1 is 40 nm
stage 2 is 60 nm
wait for 10 min
then 180 degre
hope this helps you
you do need an angle guage!
The answers post by the user, for information only, UKQnA.com does not guarantee the right.