How do i enter my security code into a rover car radio?
Answers:
Switch radio on - CODE appears in the display
Press the manual tuning buttons (up and down) to select the first digit - Press pre-set 1 to enter the digit
Repeat for digits 2-4 using pre-set 1 to enter each digit.
If the correct code has been entered a double two-tone bleep will sound and the radio will operate.
WARNING - If an incorrect code has been entered, a single warning tone will sound and the first time delay period commences (1 minute). During the delay period WAIT will appear in the display - DO NOT SWITCH OFF. At the end of the delay period CODE will appear in the display and you can enter the correct code. The time delay doubles each time an incorrect code is entered.
enter the digits using 1-5 buttons. then press 5
look at your radio manual it will tell you .oh and it will be something like the answer above they all are.
if you have never set your own then it should be 0000
The answers post by the user, for information only, UKQnA.com does not guarantee the right.