Could any 1 tell me step by step how to get window winders of corsa cars?
Answers:
quite easy , you will need a small swrewdriver and a small piece of rigid wire you can put a small hook on the end . place the srewdriver between the winder( were it is attached to the door )and the door panel then apply gentle pressure , if you look down the length of the winder handle you will see a clip holding the winder to the mechanism (sometimes there is the door panel then a plastic washer then the handle,you will need to slide the screwdriver between the washer and the winder ) then get the rigid piece of wire (with the hook on the end ) slide it under the clip pull it gently and it will pop off . to refit it just pop it back on again . i normaly use an old coat hanger and flat the end with a hammer then form a hook with it .
are you talking about the Knob?
1: Buy a Haynes manual
2: Follow instructions
The answers post by the user, for information only, UKQnA.com does not guarantee the right.