Does anybody know how I should remove the inside rear door panel of a 1997 E230 Mercedes (before I break it) x
Does it pop off? Are there any holding screws? Is there an order I must stick to? Will there be problems getting it back on?
Sorry to be so needy but any help is much appreciated x
Answers:
.There are usually screws holding the handles on, these need to be taken off first. Then starting at the bottom outside corner try to pull the door panel off gently, working around the bottom and up the sides. It should be held on with popper type studs. Once you have popped a few of these you can look behind and see where it is still attached, you may have missed some screws to remove. Remove all. But remember be gentle and patient or you will damage the panel.
try going to a shop like halfords they usually have guides on different cars,
obviously don't buy the guide just have a flick through and see if you can find the information
The answers post by the user, for information only, UKQnA.com does not guarantee the right.