Ok try again lol ford probe 2 litre 16v engine, changing big end shells, got sump off nxt bit wont budge?
Answers:
If its out the car i cant see why you cant seperate the gearbox bell housing, it could be stuck on the dowels. If its in the car it could be because the gearbox has an engine mount and you may not be able to seperate it while its in the car. Having said that if you can see your conrods and you are only changing the shells then just take the big end caps off the crank and renew your shells. Hard to say without seeing it. Good luck
gotcha, there might be bolts tho bell housing into engine part, try that mucker
it was the bit, bit that confussed me, bit to technical
If its just a thin plate Its just a guard and it is bolted on under the bell housing typical ford design at least it used to be have a look not much help I know but I am more skilled with hands on than giving instructions I am skilled at looking at problems and working out the problems that's as much help as I am willing to give without seeing the engine don't want you 2 **** any thing up on my account
The answers post by the user, for information only, UKQnA.com does not guarantee the right.