How to wash resin off the car?
Answers:
put a cloth over the resin, and pour boiling water over it, this should make it tacky, make sure the clothe is thigh over the resin, and the cloth should absorb some of the resin, , another way, untested tho, and not too be used on plastic bumpers, put a wet cloth over the resin, and get an iron, put it on the cool setting, and iron the cloth, it should heat the resin, and make it soak into the cloth
finish both ways with a small amount of rubbing alcohol, wash that off, and apply a wax/ polish afterwards
just a hot jet wash, u can buy a pre soak, but hey it damages ur paintwork.
You can use bug and tar remover, its with the wax at autoparts stores.
If it's dry, you can use a fiber brush, it's a brush that has a small tip like a pen, made of fiber ( kind-of like glass ), then polish the paint with a liquid paint polish.
If it's still wet, with alcohol.
Just be more careful where you stash your resin in future!
rubbing alcohol should do the trick but be prepared for a lot of scrubbing. it will come off hard but not dammage the paint. afterwards you will want to apply a good wax job
The answers post by the user, for information only, UKQnA.com does not guarantee the right.