Does anyone know how I can fix indicators on a rover mini?
Answers:
silly, change the indicator bulb or take it ur garage
Its probably your indicator switch,if your hazards work its not the bulb as suggested.This is a common fault on minis a small piece of plastic breaks of the switch assy.Regards Mick
try checking the electrics it really could be anything get proffesioal hep
dont bother stick your arm out the window
If bulbs are ok, it's more than likely the Relay, normally found next to the fusebox
Unscrew the fusebox on the bulkhead, and check for corrosion of the contacts on the rear of the fusebox. Also check that all the wires have a tight contact on the tabs on the sides of the fusebox. Tighten any that are loose and spray WD40 to remove corrosion, or switch cleaner if you have any. I had to replace the fusebox on my mini, I had one spare and the indicators worked perfectly again. New fuseboxes are only a tenner from any mini specialist
Check the bulbs first - if its not this then is most likey an earth or a short circuit problem..
use a sledge hammer if this doesnt work try a scrap dealer he will out it in a press
have you checked the flasher units
The answers post by the user, for information only, UKQnA.com does not guarantee the right.