What is the correct tyre pressure for a Chrysler neon r/t model?
Answers:
That depends on the size tire that is on your vehicle.
if you check the inside of the drivers side door there will be a sticker that has all of the correct information.
Its on either the passenger or drivers door pillar/door when open
Should be on the inside of the door,or on a tab under the bonnet
Go down to Kwik Fit,they have a chart which shows the tyre pressures of cars.Also the petrol stations use to have them by there air pumps.
Anyway it shud be in your handbook..
read your tire all tires psi should be the same about 35 psi
it will say on your tyres
Look at the drivers door pillar and in the owners manual,.
Did you check the owners manual? It will tell you in there if it is worn off the pillar .
I have had three Neon R/Ts. The inflation pressure for all of them was 32psi ( I forget the metric equivalent) front and rear. I might caution you that it is possible, maybe even probable, that non-OEM tires with or without aftermarket wheels may change the above numbers. Since Neon engineering is basically the same for all examples, I feel confident that this tire pressure is also true for the international market.
32 pounds, I think. It can vary by type of tire, though. Call a dealer or check on the driver's front door sill, it's usually there for the tires that came with the car.
The answers post by the user, for information only, UKQnA.com does not guarantee the right.