How do i reattatch a wing mirror?
Answers:
You need to look at how much material is left to work with. Can you put a bolt through something into the door? If there isn't much left of your mirror you might try seeing if there is a replacement part that you can bolt on. See if there is an expanding butterfly nut you can use to affix the new part so you don't have to worry about removing the driver side window as well. Be careful drilling as you don't want to go through any further than you have to.
ive had this u need to push the mirror square and very hard till u her it clip in :)
Use duct tape.
what you will need to is to : push the mirror square and very hard until you hear it clip in, hope this helps
it depends on the damage
you can just reattach it if it's only been knocked out of it's retaining clips
if it's broken then get one from the local breakers yard to fit it you have to remove the trim from the inside of the door where the mirror fits you just carefully pry it off (triangular shape) and there are 3 screws under it just unscrew and fit the replacement a 15 minute job if your slow
as to driving without it it would depend on your instructor The drivers mirror is quite important so be aware and drive more carefully
The answers post by the user, for information only, UKQnA.com does not guarantee the right.