How do you program a remote key for a ford scorpio 1998?
Answers:
take it to fords
How to re-program the remote
These instructions are for the 95-on Scorpio, but may work for other post-95 Fords as well.
With the key in the ignition, turn the ignition on to the I position, then off and then again three times, then once more and leave it at I. A beep will sound showing that the system is set to program.
Now press the unlock button on the remote. Press the unlock button on any other remotes that you have to program at the same time.
Now turn the ignition off. A beep will sound indicating that program mode is finished.
The remote is now programmed and you have saved yourself £45!
Note – Do not press the buttons on the remote more than ten times when out of range of the car. At each press, the code alters on the onboard security computer and the remote. If you’re out of range of the computer, the remote changes the code so that the onboard computer no longer recognises it. Then you need to re-program again.
The answers post by the user, for information only, UKQnA.com does not guarantee the right.