How to fit a radiator on a taxi?
Answers:
If its a small leak-BUY Bronze Seal ! LARGE leak K&W Block sealer-or get a propane torch & soder & somebody that knows how to use them.BUT be sure you don't have another problem like a blown head gasket or stuck thermostat.Be sure you have coolant flow.Be sure the radiator cooling fins are clean so the air will flow through it.
don't know don't care
A radiator on a taxi? i'm sure they have radiators pretty much everywhere, unless you plan to live outside
If you buy the right radiator it will fit without modifications.
Buy a radiator for the make and model of the car, replace it, fill with coolant, and drive many more carefree miles with that strange smell only a taxi will have.
Whenever fitting a rad to any car, make sure it is bled out properly afterwards. This is very important. If the system gets air locked then it will cause damage.
After fitting and filling with water do the following. Turn on engine, put inside heaters on full heat {internal airflow}, Wait for fan to come on and the heat to come out of vents. Abit more difficult if there are bleeding nipples. Watch the in dash temperature. If air is hot and fan comes on then it is bled,
If ther is no hot air and the car starts to boil then turn it off and gat a pro.
The answers post by the user, for information only, UKQnA.com does not guarantee the right.