The screen wash motor seems to have packed in (no noise when activated)?
Answers:
It's the motor found at the bottom of the screen wash bottle, I had this on a 306, bought the motor for a fiver took about ten minutes to fit as was a bit awkward to get to, just a plug part.
Go to a scrappy and you'll see what it looks like and where it fits too.
good luck!
Sounds like the motor has burnt out.
mine did this alot too - normally 4 times a year.
it was the fuse each time though. are you sure you have checked them all. check your hand book before going any further.
you need to check the power and earth to the washer bottle motor which is located in the o/s/f wheel arch guard in front of wheel. If you have these and no fuses are blown then you will require a new washer pump motor.
Genuine Peugeot Parts washer motor is about £7-£8 very easy to fit about 5 mins work..Tip, buy a new rubber seal at the same time about £1 for a genuine Pug one..fit at the same time
The answers post by the user, for information only, UKQnA.com does not guarantee the right.