How do I repair a roller shutter door?

I need to replace the bottom section of a roller shutter door. I have the new section but cannot see how to remove the old one. The doors are fitted in a luton van

Answers:
if it's alloy it will slide in from the side they interlock with the next section you have to remove the whole shutter to do this also be carefull to lock the tension spring first you should find a hole in the roller at one side put a nail in to the hole and move the shutter up and down slowly untill the nail or a thin bolt goes right through the roller this locks the spring
There are a few places you can look. If you don't see bolts anywhere on the surface, then they're probably under the door panel. Also, you will have to find how the bearing slips into the track. There's usually a piece bolted to the track that you can remove which provides the opening. You might have to remove some trim or carpet to find it.

The answers post by the user, for information only, UKQnA.com does not guarantee the right.

  • vauxhall sintra problem?
  • will a seat cordoba engine fit in a same year ibiza car?
  • What makes the noise of your car horn?
  • Question is Buy a diesel or petrol car? Diesel is more expensive than petrol but diesel gives you more mpg's.
  • 2nd Hand Moped - Wanted?
  • anyone got a 50cc moped or scooter for sale?
  • Overtaking past junctions in the UK?
  • Anyone own or used to own a 2CV? What is your best story about it?
  • If the taxi drives backwards, do they pay you?