How do you reset a ford mondeo key fob after battery change?
It is a two button key fob.
Answers:
Just been trying to do mine for last 2hours. Tried various forums and other web sites - none were correct. Finally had success with OKLATOM's suggestion on this site! (See entry above) Cheers.
I heard that putting it in the freezer works, but can't be sure. You'd need to put it in probably for 12-24 hours. You could try the Hanes Manual for it too.They're very detailed.
in most fords, you have to turn the ignition form off to run back and forth about 8 times until the doors lock, leaving the key in the run position, then press any button on the remote and then turn the key back to off.
Try here . http://www.fordmondeo.org
Ask the person who you bought it from.
or contact any ford dealer
FORD Mondeo 93> Mondeo 96> (Infrared 2 Button) - Key Remote Programming
1. Unlock Vehicle, and turn ignition to position 1.
2. Wait until the PATS LED illuminates (app 10 seconds)
3. Switch Ignition to 0 – within 5 seconds – LED will remain on
4. Point the Remote at one of the front Receivers
5. Press a button and keep pressed – within 20 seconds of step 3
6. When the LED on the Key lights press the other button 3-5 times
7. Release both buttons while still aiming at the receiver
8. If successful, both LED’s will flash 5 times
9. Repeat 5—9 for additional transmitters (within 30 seconds)
10 .When completed, Turn Ignition to II then 0 to store the Keys
The answers post by the user, for information only, UKQnA.com does not guarantee the right.