I have mazda 323f, i engage clutch but nothing happens it just revs with no movement in any gear.?
Answers:
Does it have any clutch pedal resistance left at all? If your hydrolic clutch is low on fluid then you have a leak somewhere. See where it is leaking and if you can't tell that then replace the slave-cylinder and the master cylinder both. The slave cylinder by the way is located on the outside of the bell housing on your transmission. Sometimes they take awhile to bleed out all the air out of the system but you can git er done right? LOL
go to mazda garage
sounds like the clutch is out or the flywheel has came unbolted or something.
maZDA check it out
take your foot off the clutch pedal!no seriously the brake fluid level has nothing to do with the problem it sounds like your clutch is knackered do you not know anyone who can come and have a look at it?
As it engages in every gear it is unlikely to be a clutch problem, check you havent busted a CV joint which transfers power to the wheels from the transmission.
Either the clutch plate is completely worn out or something in the transmission is broken.
The answers post by the user, for information only, UKQnA.com does not guarantee the right.