Cbr600 ft cam chain rattle any mods to stop this?
Answers:
I guess the first question is; are the parts gaped and tightened to manufacturer specs?
If you have high miles, the cam chain may be worn beyond the stock adjuster's ability to control noise. Check Honda for what's considered high miles on a cam chain for your CBR600.
New cam chain and tensioner.
Are you sure it's the camchain?
Hondas often rattle at tickover (idle), and it's usually the clutch basket.
If the sound reduces when you pull in the clutch lever or raise the engine revs, that's where the sound is coming from (and "they all do that, sir!"). If so, it's normal.
There are no mods to stop it that i know of other than a service to the cam chain tensioners. I've got 29000 miles on my CBR600rr & it's rattled from day one & it's got a full service history. There's probably nothing wrong with it unless its running bad.
Have the carb/throttle body sych checked first.
Aftermarket cam chain adjuster (but if you dont know what your doing it will break chain )
If over 20,000 miles get new chain fitted
NO!!! the cam chain,cam chain tensioner,are probably worn and must be replaced,failure to do so will possibly cause serious damage to the engine.it is cheaper to pay to have it repaired now,as compared to later!
Check your sprocket and see if the chain needs tightening. This could be dangerous, as if the chain is loose it may "snatch" when you change gear. Check bfore u use the bike again (Nice bike; dont drop it!"
you can get manual cct that do not have springs and will not back off like the honda ones do
shorten it
The answers post by the user, for information only, UKQnA.com does not guarantee the right.