Problem with Sony VTX-D800U DigiBox?
Answers:
Chrisbell is correct in part but the method he describes is for a Sky box not a Freeview box.
Two possibilities for Freeview .
1. With the unit powered up and the LED showing green, press the power button on the front of the unit and keep it held until the LED turns orange - release and allow to go into standby (LED goes red) - power up and retry.
2. Leave it in standby overnight for an 'over air download' to upgrade the software. If memory serves me right it should be Version 1.12.3 - don't worry about the Loader version.
Any further probs, get in touch.
Sony UK technician.
hi.you need to update the software for the didgibox.so, here is how to do that.
first.find the 'backup' button on the front of your digibox.
next.press that button in and hold it in, and pull out the power lead on the back of your digibox
then.while still holding that 'back up' button in, plug the power lead back into the digibox.
now you will see on your tv screen a message saying that the software is being updated.and this normally takes between 3-10 minutes.
once that has completed your digibox will go into standby, so then just switch it back on with your 'sky' button and you will find everything will work as it should again.
finally.it is best to do a software update every 'month'.and in this way you will keep your digibox working at optimum.
hope this helps.good luck
if the back up dont work, try services ,system set up. then press 0(zero) then 1, select you get installers menu. the new installation, follow on screen instructions, that should do it
The answers post by the user, for information only, UKQnA.com does not guarantee the right.