I can't get intarsia knitting right. somebody help me!?
Answers:
If all else fails, check with your local yarn shop. Most have days and times where you can get someone to help you with a project for a small fee. Sometimes the only way to get your head around a problem is to have someone go through it with you step by step.
When knitting intarsia, blocks of color are worked with separate balls or bobbins of yarn, producing a sweater only one layer thick. Before starting to knit, wind each color onto bobbins, so you will not be carrying yarns across the back of the sweater.
If large balls or long strands are used, it won't take long before the yarns become tangled.
It is well worth the time it takes to wind bobbins, which you can keep up close to your work.
You can purchase knitting bobbins, but we prefer to buy bags of wooden spring clothes pins, which are inexpensive in bulk, and easy to wind and unwind.
If you are knitting intarsia for the first time, we strongly suggest that you practice with some scrap yarn before beginning your project.
You will find knitting your sweater much easier if you use a Knit Count, to keep track of rows as you knit. Another item we consider essential is a Chart Guide, to keep track of the current row of your pattern. We currently use a magnetic board made by LoRan to track the row on the pattern.
When tying one color to another, tie the two ends together with a square knot up next to the needle, leaving a 5-inch tail to weave in when finishing the sweater.
When changing from one color to another (yarns already attached) you must always bring the new color over the color you have just finished using. You don't want to twist the yarns so tightly around one another that they look pinched, or so loosely that there is a slight gap.
Weaving In the Ends:
With the back of the sweater facing you, thread an embroidery needle on one of the hanging ends. Insert the needle vertically into the adjacent stitch and pull up the yarn, closing the hole. Be sure to keep the tension consistent with the rest of the stitches. Then insert the needle vertically into the base of the previous stitch. Continue weaving in the same manner for a few more stitches, then cut off the excess yarn, leaving a half-inch tail.
Maybe it'll be easier if you can see someone doing it. Here's an instructional video that shows how to do intarsia:
http://www.knittinghelp.com/knitting/adv.
Scroll down to the section called "How to knit with 2 colors at a time" and click on camera icon next to "Intarsia method"
go here
http://www.knittinghelp.com/knitting/adv.
and scroll down until you see intarsia knitting
and click on the camera icon
it has a video that goes along with it
Good luck!
The answers post by the user, for information only, UKQnA.com does not guarantee the right.