Washing machine drawer not working.?
It never ever worked, right form the moment I bought it brand new, but i was too busy with new baby and stuff totake it back and now its too late. The problem is that I put the powder in the drawer but it's still there when the wash is done, is there any way for me to fix this?
For the past year I hva been using liquid soap and it works perfectly well but its just annoying not knowing whats wrong with the drawer
Answers:
Is it in the correct compartment.
Perhaps your water pressure is too low..or the tap on the connector is not fully on.
Pull the drawer right out..wash it in a bowl of hot water...make sure that every hole that is in the drawer is free from gunk then get down eye level to the hole that the drawer sits in and check out for any blockages..or even better..turn on the washing machine as normal set it to wash and see where the water comes from and where it goes to..if it flows freely..no blockage.but it will show clearly what compartment should have the powder in..
That happens to mine, too. I always figured it was the powder, not the drawer. Try changing brands - or if the liquid stuff works okay, stick with that. It might be worth getting a technician out, one who works on your particular brand of machine - they're usually fairly cool, and won't charge too much if the problem's easily fixed.
I suppose the water doesn't go into the drawer, but the liquid soap just rinses in the machine. I bet you still have warranty, and you could call the warranty officer to come and fix it.
Is the powder in the right drawer silly I know but my old one was different to my new one. Also is it cold or hot fill this causes a problem sometimes with powder. I f I can't sort it myself and hubby is useless at things like that I phone maunfacturer HTH
are you using soap tablets,found same problem,then found that if you put tablet in string bag (usually free with powder ) and put it in with the washing all was ok.
0
me too - first answer is right. Good thing liquid wash balls can go in with the clothes!
Have you tried taking the drawer out and looking in the back? There could be some obstacle there. The liquid detergent will just spill into the machine. Sometimes my fabric conditioner drawer fills up with water and it usually helps when I pull the drawer out and have a good hoke in behind. Bit of a pain though.
Incidently, what brand is the washing machine? I ask as I need to get a new one soon and might avoid the same make.
you have a problem with one of the solids on tha back of the washer were the pips fit on the machine if u have a problem email me at domesticelectricalservices@yah.
Try changing the brand of washing powder. Mine does it to if I use a cheaper brand. Also make sure there is no build up of washing powder underneath the drawer.
can fushias be grown by seed?
old slippers in the wash machine left small pieces of sole all over the drum - could the machine be broke?
why is selling and buying houses so stressing ahg!?
RADOX BUBBLES or LAVENDER OIL .. ? off for a long hot bath . what would you recommend ?
anyone no where to get spare parts for a vax hoover?
What colour is the gap in the dent on the floor when it`s a pond turkey flower.?
what is different when you have double glazing?
Is 600mm a normal size for a cooker?
For the past year I hva been using liquid soap and it works perfectly well but its just annoying not knowing whats wrong with the drawer
Answers:
Is it in the correct compartment.
Perhaps your water pressure is too low..or the tap on the connector is not fully on.
Pull the drawer right out..wash it in a bowl of hot water...make sure that every hole that is in the drawer is free from gunk then get down eye level to the hole that the drawer sits in and check out for any blockages..or even better..turn on the washing machine as normal set it to wash and see where the water comes from and where it goes to..if it flows freely..no blockage.but it will show clearly what compartment should have the powder in..
That happens to mine, too. I always figured it was the powder, not the drawer. Try changing brands - or if the liquid stuff works okay, stick with that. It might be worth getting a technician out, one who works on your particular brand of machine - they're usually fairly cool, and won't charge too much if the problem's easily fixed.
I suppose the water doesn't go into the drawer, but the liquid soap just rinses in the machine. I bet you still have warranty, and you could call the warranty officer to come and fix it.
Is the powder in the right drawer silly I know but my old one was different to my new one. Also is it cold or hot fill this causes a problem sometimes with powder. I f I can't sort it myself and hubby is useless at things like that I phone maunfacturer HTH
are you using soap tablets,found same problem,then found that if you put tablet in string bag (usually free with powder ) and put it in with the washing all was ok.
0
me too - first answer is right. Good thing liquid wash balls can go in with the clothes!
Have you tried taking the drawer out and looking in the back? There could be some obstacle there. The liquid detergent will just spill into the machine. Sometimes my fabric conditioner drawer fills up with water and it usually helps when I pull the drawer out and have a good hoke in behind. Bit of a pain though.
Incidently, what brand is the washing machine? I ask as I need to get a new one soon and might avoid the same make.
you have a problem with one of the solids on tha back of the washer were the pips fit on the machine if u have a problem email me at domesticelectricalservices@yah.
Try changing the brand of washing powder. Mine does it to if I use a cheaper brand. Also make sure there is no build up of washing powder underneath the drawer.
The answers post by the user, for information only, UKQnA.com does not guarantee the right.