I have some new doore that are warped and twisted is there a easy way of straightening them?
Answers:
Assuming these are Internal doors (they 'see' the same temp on the inside and outside) they should remain flat. Take them back, but, when you get replacements, lay them on the shop floor, push down on each corner, , turn over the door, and repeat.the door should not move when you press down, otherwise its twisted. External doors will'move' with hot and dry on one side, cold and wet on the other.Use a 'Leaf' type draught excluder if this is the case.
big big job
if they are warped and new take them back to where you bought them from
return them, get new doors
it's almost to straighten a warped door
know any fat people?
How come? to straighten out warped doors you must place them in pergatory, lay them flat and cover with heavy flat object and leave, or take them back to where you bought them.
You should return them to the retailer and ask for a replacement, saying you did not know they were twisted until you were going to hang them. Taking a twist out of a door would take a long time and would not be economical, and once you start to alter the doors you would not be able to return them. There is no easy way to take a twist out of a door.
have a bit of nookie on them that should straighten the problem 4 ya good luck
not in a million years, replace, check they are ok before u buy them
If they have warped once, they will warp again, get them replaced.
The answers post by the user, for information only, UKQnA.com does not guarantee the right.