Fitting white panel internal doors.?
I am thinking about changing all the doors in our house to white panel, need about 8 in total.
To speed the job up i thought about purchasing a router (£20 in Argos-uk) to cut out hinge and door handle requirements any body else fitted their doors this way.
Answers:
That is the best way to do it, but you must get the Template for the hinge, make sure you match the size -
I didnt try ur method.But be careful and dont damage ur panels .Ask a good architecture
it can be done even cheaper with a hammer and wood chisel
there is a special drill bit you can buy to cut holes for the door knobs also
I am a Joiner, the only time I would use a router for sinking hinges into doors is if I had dozens to be done, the time it takes to set up for each door the job could have been done faster by hand. Good luck.
i would advise you to get a joiner to hang your doors its not very expensive and it will be done rite.
hammer and chisel man myself
its quicker no jig to set up 25 < 30 minutes per door 2 hinges
and handle
GREY SQUIRRELS detterant needed?
can anyone name the insect i saw in the garden, it had a long, blue body with black wings about 45-50mm long?
i'm trying to design a home extension. any tips on how to do it (not involving software as Ive tried that)
Where can i buy a good recordable DVD Player?
I'm looking for retro wallpaper!?
Is it illegal to have a bonfire of a reasonal size in the backgarden?
Do I need the heating on yet?
Why do Electricians?
To speed the job up i thought about purchasing a router (£20 in Argos-uk) to cut out hinge and door handle requirements any body else fitted their doors this way.
Answers:
That is the best way to do it, but you must get the Template for the hinge, make sure you match the size -
I didnt try ur method.But be careful and dont damage ur panels .Ask a good architecture
it can be done even cheaper with a hammer and wood chisel
there is a special drill bit you can buy to cut holes for the door knobs also
I am a Joiner, the only time I would use a router for sinking hinges into doors is if I had dozens to be done, the time it takes to set up for each door the job could have been done faster by hand. Good luck.
i would advise you to get a joiner to hang your doors its not very expensive and it will be done rite.
hammer and chisel man myself
its quicker no jig to set up 25 < 30 minutes per door 2 hinges
and handle
The answers post by the user, for information only, UKQnA.com does not guarantee the right.