How do you get rid of limescale from your kettle?
Answers:
Add a tablespoonful of citric acid (should be available at the supermarket) to the water and boil. You may have to repeat this once. The effect is amazing - it works much better than vinegar and doesn't smell. Not toxic.
Vinegar
I use any descaler product which is available at my supermarket. You just need to follow the directions on the package, which is usually to use the powder with water, let it soak for a couple of hours, then rinse several times.
boil vinegar in it,give it a gud wash afterwards :-)
Lots of elbow grease! If it is a cast iron kettle, you need to scrub with comet (or something similar), and then rub it down with Wesson oil. If it is a non-stick surface, gently rub with an SOS pad, and I mean gently. You might try Krud Kutter, which is sold at Wal-Mart. It will cut just about everything.
Rain
Soak the kettle in CLR for a few minutes. That should remove most of the lime buildup.
Use limeaway.
My mom always used vinegar with a little bit of baking soda. They have a cleanser now called The Works and that stuff is the best ever. I would try to find that if you can b/c its the best!!!
you can get theese little mettal rings that you put in your kettle and the limescale only forms on them and not the element in the kettle vinegar works but the descaler from the hardware store is better try robert dyas or woolworths :)
buy a kettle DE-scaler from thee supermarket. various brands. then to stop it building up again buy a water filter and filter the water you put in your kettle and you wont get any more limescale.
You can buy a propriety cleaner in any supermarket but just as efficient and far cheaper is some dilute citric acid from your chemist.
A mixture of half water and half white vinegar left in a kettle overnight will get rid of limescale as effectively as any chemical remover. To remove the odour afterwards, boil fresh water in the kettle a few times. Let this water cool down and you can use it to water the plants.
a marble in your kettle works
White vinegar works best. half fill your kettle with water bring it to the boil then add 200-300mls of white vinegar, leave for about 20 mins or until it disolves then empty, refil, then boil twice.
P.s open alot of windows, it smells a little but it's an eco friendly way of doing it.
Prevent the limescale from forming in the first place by getting a water conditioner fitted to the incoming water supply. basically its coils of wire wrapped around the copper pipe and a small electric current is passed through them. You can clean your kettle but imagine what is happening to the central heating boiler
The Works is the best thing I have found. It worked on my kettle and I found it at the dollar store.
soak it in bi-carbonate of soda over night
Limescale is an alkali.
To get rid of it use any acid.
vinegar is an acid and will do the job - but it's not very strong.
Buy a de-scaler from the Supermarket - they come as a liquid - and follow the instructions (basically add to water in the kettle and wait!) It's not expensive.
IOnce you have removed limescale. I recommend vinegar dilute with boling water. keep a clean washed sea shell the strong flat ones are the best inside the kettle and rinse kettle out every week.. it will reduce the limescale. alternativley. move house to a softer water area.!!!
spirit of salts, buy it from a hardware shop
try steradint as it is brill
limescale remover
Put sterident into kettle and leave for a while then rinse that will give you a new looking kettle
The answers post by the user, for information only, UKQnA.com does not guarantee the right.