Does flicking a light switch on and off several times do any kind of damage?
Answers:
Yes, it will wear the skin down on your finger tip !
no, but will wear down the switch mechanism
This will shorten the life of the bulb due to repeated heating and cooling of the filament.
"weakens the switch" i'm afraid......
I always heard it can make the bulb blow quicker.
only if you have the other hand in a plug socket at the same time!!...sorry, don't know.
Only to your finger...
Repetitive strain injury!
Ask an epileptic
It does if you're having a bath at the same time!
try it and see..
SEIZURE
It can make you dizzy after awhile.
not if it is a not too old switch
in older switches this could lead to a malfunction in the switch mechanism, causing it to block.
in even older switches you may be unlucky enough to cause some short circuit.
my guess is that the reason why parents have always told this to kids, is that it worked well to stop them from playing with switches ;-)
it will certainly wear out the switch.
It does slowly wear on the parts and wires. Like anything man made, its not perfect, but just accepted as the way to do it for now. Its like drivig your car, it wewars it out and some damage will happen to it over time.
yea will blow the fuse i tink
It might make the bulb blow or damage your light switch.
When ever a motor driven device short cycles or goes on off on again, something will be damaged. Overheating to the windings, loose fan blades and pulleys, and yes lighting damage from current surge and voltage spikes.
If you are switching on and off an incandescent bulb, it can cause the bulb's failure by repeated thermal shocks to the filament. The filament gets very hot, right? So by allowing it to cool off (the lamp goes out and the bulb stops glowing) and then lighting it again, the filament is made to repeatedly heat and cool.
Metal fatigue can result. That, combined with migration of the tungsten atoms as the current flows will eventually result in a weak spot in the filament; and when it is thin enogh, it eventually cracks at the in-rush of current due to thermal shock and the bulb will no longer work.
If you shake it while the power is on (say, it's a table lamp) and you are VERY lucky, the ends of the filament might overlap for an instant and hit and weld together because the current will instantly heat them. The bulb will work again. But that is not a permanent fix! The filament is still old and weak and will eventualy break again.
Take my suggestion and replace it with a power-saving compact fluorescent lamp, or an LED (light-emitting diode) lamp. They are more expensive than incandescent bulbs, but last much much longer, use much less power and will save you money in the long run.
If everybody across the country replaced their incadescent bulbs with compact fluorescent lamps, we would save so much electricity, it would be equivalent to building dozens of new electrical generating plants, without having to build them! Your electric bill would go down!
Also, the reduced demand for oil and gas to generate electricity would make the US less dependent on sources of foreign oil, and the price of gasoline would also go down. Neat, isn't it?
as it transpires, it has a variety of damaging effects.
the most obvious is the weakening of the lightbulbs filament, it can survive being heated to white glow and cool down again only so many times.
then there is abrasive damage to the switches mechanism.
it wears off your skin, although that grows back.
it wears off your knuckle joints, and those dont grow back.
it produces a small amount of ozone evertime the switch closes contact.
it can cause an epileptic seizure in so predisposed persons.
it induces a small amount of oxydation on the lampsockets contacts.
hmmm i think thats all for now. i will call you when i think of more. until then. happy switching.
The answers post by the user, for information only, UKQnA.com does not guarantee the right.